Timer Recording Radio Programs - Sony CMT-CPX11 Operating Instructions Manual

Other operations
To
Check the settings
Change the setting
Cancel the timer
Notes
• If you use Play Timer and Sleep Timer at the same
time, Sleep Timer has priority.
• Do not operate the system from the time the system
turns on until the play starts (about 15 seconds before
the preset time).
• If the system is on about 15 seconds before the preset
time, Play Timer will not be activated.
• You cannot use the optional component connected to
MD/VIDEO IN jacks as the sound source for Play
Timer.
• You cannot activate Play Timer and Timer recording
simultaneously.
GB
18
Do this
1
Press CLOCK/TIMER
SELECT.
2
Press ./> repeatedly
until "PLAY SEL" appears,
then press ENTER.
Start over from step 1.
1
Press CLOCK/TIMER
SELECT.
2 Press ./> repeatedly
until "TIMER OFF" appears,
then press ENTER.
Timer recording radio
programs
To timer record, you must first preset the radio
station (see "Presetting radio stations" on
page 11) and set the clock (see "Setting the
clock" on page 7).
Use buttons on the remote for the operation.
1
Tune in the preset radio station (see
"Listening to a preset station" on
page 12).
2
Press CLOCK/TIMER SET.
3
Press repeatedly until "REC
./>
SET" appears, then press ENTER.
"ON" appears with a flashing hour
indication.
4
Set the time to start recording.
Press repeatedly to set the hour,
./>
then press ENTER.
The minute indication flashes.
Press repeatedly to set the
./>
minute, then press ENTER.
5
Set the time to stop recording following
the same procedure as step 4.
Timer Recording settings and the desired
station appear, then the original display
returns.
6
Load a recordable tape and press
TAPE (or FUNCTION repeatedly) to
switch the function to TAPE.
7
Press DIRECTION on the unit
repeatedly until g appears to record
on one side or h (or j) to record on
both sides.
8
N
Press (or TAPE nN on the unit)
repeatedly to select recording side,
then press x.
If you select both sides recording or front
side recording, press N (or TAPE nN
on the unit) until "N" appears. If you
record on the reverse side, press N (or
TAPE nN on the unit) again until "n"
appears.
9
Press ?/1 to turn off the system.