Creating Your Own Program; Program Play - Sony CMT-CPX11 Operating Instructions Manual

Creating your own
program

— Program Play

You can make a program of up to 25 steps.
You can synchro record the programmed tracks
onto a cassette tape (page 15).
1
Press CD (or FUNCTION repeatedly) to
switch the function to CD.
2
Press PLAY MODE in stop mode
repeatedly until "PROGRAM" appears.
3
./>
Press
desired track number appears.
When programing an MP3, press ALBUM
+/– repeatedly to select the album, then
press ./> repeatedly until the
desired track number appears.
Selected track number
4
Press ENTER (or PLAY MODE).
The track is programmed.
The program step number appears,
followed by the last programmed track
number.
5
To program additional tracks, repeat
steps 3 and 4.
6
Press N (or CD NX on the unit).
Program Play starts.
GB
10
repeatedly until the
Total playing time
Other operations
To
Cancel Program Play
Erase the program
Add a track to the end of
the program
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press N.
However, the program is cleared when you eject the
disc.
• "– –.– –" appears if the total program time exceeds
100 minutes, if you select a track whose number is 21
or over, or when you programed an MP3 audio track.
Do this
Press PLAY MODE in stop
mode repeatedly until both
"PROGRAM" and
"SHUFFLE" disappear.
Press CLEAR in step 4.
Each time you press the
button, a track is cleared
from the end of the
program.
Perform steps 3 and 4 in
stop mode.