Hyundai i20 Active 2016 Owner's Manual page 37

S S eat belt warning (if equipped)
As a reminder to the driver, the seat
belt warning light will blink for approx-
imately 6 seconds each time you turn
the ignition switch ON regardless of
belt fastening.
If the driver's seat belt is unfastened
after the ignition switch is ON, the
seat belt warning light blinks again for
approximately 6 seconds.
If the driver's seat belt is not fastened
when the ignition switch is turned ON
or if it is unfastened after the ignition
switch is ON, the seat belt warning
chime will sound for approximately 6
seconds. At this time, if the seat belt
is fastened, the chime will stop at
once. (if equipped)
Lap/shoulder belt
1GQA2083
To fasten your seat belt:
To fasten your seat belt, pull it out of
the retractor and insert the metal tab
(1) into the buckle (2). There will be
an audible "click" when the tab locks
into the buckle.
The seat belt automatically adjusts to
the proper length only after the lap
belt portion is adjusted manually so
that it fits snugly around your hips. If
you lean forward in a slow, easy
motion, the belt will extend and let
you move around. If there is a sud-
den stop or impact, however, the belt
will lock into position. It will also lock
if you try to lean forward too quickly.
i
Information
If you are not able to pull out the safe-
ty belt from the retractor, firmly pull
the belt out and release it. After
release, you will be able to pull the belt
out smoothly.
ODH033055