Hyundai i20 Active 2016 Owner's Manual page 292

T T urn signal light
1. Remove the turn signal light bulb
cover by turning it counterclock-
wise.
2. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
3. Insert a new bulb by inserting it
into the socket and rotating it until
it locks into place.
4. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assembly
and turn the socket clockwise.
5. Install the turn signal light bulb
cover by turning it clockwise.
Static bending light
Follow the steps 1 to 2 from the pre-
vious chapter.
3. Remove the headlight bulb cover
by turning it counterclockwise.
4. Disconnect the headlight bulb
socket-connector.
5. Unsnap the headlight bulb retain-
ing wire by depressing the end
and pushing it upward.
6. Remove the bulb from the head-
light assembly.
7. Install a new headlight bulb and
snap the headlight bulb retaining
wire into position by aligning the
wire with the groove on the bulb.
8. Connect the headlight bulb socket
connector.
9. Install the headlight bulb cover by
turning it clockwise.
10. Connect the power connector to
the back of the headlight assembly.
OIB075062