Hyundai i20 Active 2016 Owner's Manual page 110

M M alfunction Indicator
Lamp (MIL)
This warning light illuminates:
• Once you set the ignition switch or
Engine Start/Stop button to the ON
position.
- It remains on until the engine is
started.
• When there is a malfunction with
the emission control system.
In this case, we recommend that
you have the vehicle inspected by
an authorized HYUNDAI dealer.
NOTICE
- Malfunction
Lamp (MIL)
Driving with the Malfunction Indicator
Lamp (MIL) on may cause damage to
the emission control systems which
could effect drivability and/or fuel
economy.
NOTICE
- Petrol Engine
If the Malfunction Indicator Lamp
(MIL) illuminates, potential catalytic
converter damage is possible which
could result in loss of engine power.
In this case, we recommend that you
have the vehicle inspected by an
authorized HYUNDAI dealer as soon
as possible.
Indicator
NOTICE
- Diesel Engine with DPF
(if equipped)
When the Malfunction Indicator Lamp
(MIL) blinks, it may stop blinking after
driving the vehicle:
- at more than 60km/h (37 mph), or
- at more than 2nd gear with 1500 ~
2000 engine rpm for a certain time
(for about 25 minutes).
If the Malfunction Indicator Lamp
(MIL) continues to blink in spite of
the procedure, we recommend that
you have the DPF system checked
by an authorized HYUNDAI dealer.
If you continue to drive with the
Malfunction Indicator Lamp (MIL)
blinking for a long time, the DPF sys-
tem can be damaged and fuel con-
sumption can worsen.