Wifi Connection - RPB GX4 08-400 Instruction Manual

WIFI CONNECTION

To utilize all of the features of the GX4
the built-in wireless network transceiver. This connection allows easy firmware upgrades and
the unit hosts a website available to devices on that network. Use the website to stream real-
time gas levels, search through logs or print reports that can be used for safety records and
meetings. This real-time monitoring does not replace the need for an audible of visual alarm
the respirator wearer.
The GX4 can operate in two wireless modes. To select a mode in the Menu go to Network
®
and then Mode. Use the arrow keys to switch between modes and press OK to select a mode.
The unit will restart and resume operation in this network mode.
HOTSPOT MODE:
Use to connect directly to your GX4
you do not have access to an existing
network.
 The GX4 Hotspot Mode does not
®
connect to the internet.
 Devices can only connect to one GX4
Hotspot Mode at a time.
 For multiple GX4
before connecting to another.
Note: Although multiple devices can
connect, the GX4
®
in Hotspot Mode your device can only
communicate to the host GX4
Hotspot Mode
Hotspot Mode
or
PC
PC
To configure your network see page 12.
when
®
s, disconnect from one
®
is not a router. When
.
®
FIGURE 2.1
Internet
GX4
*Limited
Connectivity
or or
Smartphone
Tablet
, it is recommended to connect it to the internet via
®
CLIENT MODE:
Use when you have access to a wireless
network {IEEE 802.11 b/g/n}.
 The GX4
network as your PC/Tablet/Smartphone
 Access the GX4
internet browser.
in
®

Multiple GX4
Client Mode to the same network and
each individual GX4
viewed on a separate web browser page.
Client Mode
PC
must be connected to the same
®
website through your
®
s can be connected in
®
website can be
®
Wireless
PC
Router
or or
Smartphone
Tablet
FIGURE 2.2
Internet
GX4
Client Mode
11