Makita DVC260 Technical Information page 5

Cordless backpack vacuum cleaner

Hide thumbs Also See for DVC260:

[2]-4. Replacing/Cleaning of Rear Block Filter

Note. Even if this vacuum cleaner is used with care and according to the instructions in the user's manual,

dust may accumulate in Rear block filters, reducing the capacity of this vacuum cleaner.

So whenever Upper and Lower housing completes are separated, remove two Rear block filters

(one on each side) from Upper and Lower housing completes, and then:

• Remove dust from the inside of Upper and Lower housing completes by blowing with compressed air.

• Remove dust from Rear block filters by blowing with compressed air or washing with water.

Disassembling

Fig. 2-4-1

(1) Follow the procedures described in 2-1 and 2-2 to remove Upper housing complete.

(2) Remove two Rear block filters (one on each side) from Upper and Lower housing completes,

and then remove dust from Rear block filters and Upper and Lower housing completes

as described in above Note.

Rear block filter

Upper housing complete

Rear block filter

5 / 11

Lower housing complete

Table of Contents