Setting Presets Through Manual Tuning - Sony CMT-CP101 Primary Operating Instructions Manual

Presetting radio stations (continued)
5
Press MEMORY on the remote.
A preset number flashes.
PRESET
1FM1005
Preset number
6
Press ./> on the remote
repeatedly to select the preset number
that you want.
7
Press ENTER on the remote.
The station is stored to the selected preset
number.
8
Repeat steps 2 through 7 to preset
other stations.
Tip
Press TUNING MODE (or TUNING MODE/PLAY
MODE on the remote) when you want to stop
scanning.
Setting presets through
manual tuning
1
Press FUNCTION repeatedly until
"TUNER" appears in the display.
2
Press TUNER BAND to select FM or
AM.
3
Press TUNING MODE (or TUNING
MODE/PLAY MODE on the remote)
repeatedly until "AUTO" and "PRESET"
disappear from the display.
4
Press TUNING +/– (or m/M on the
remote) repeatedly to tune in the
desired station.
5
Press MEMORY on the remote.
A preset number flashes.
PRESET
1FM1005
Preset number
GB
10
STEREO
TUNED
MH z
Frequency
STEREO
TUNED
MH
z
Frequency
6
Press ./> on the remote
repeatedly to select the preset number
that you want.
7
Press ENTER on the remote.
The station is stored to the selected preset
number.
8
Repeat steps 2 through 7 to preset
other stations.
Other Operations
Do this
To
Follow the procedure described in
Tune in a station
"Setting presets through manual
with a weak
signal tuning".
Press TUNING MODE (or
Stop setting
TUNING MODE/PLAY MODE
presets
on the remote).
Start over from step 2.
To change the
preset number
To change the AM tuning interval
(Except for the European, Middle
Eastern and Philippine models)
The AM tuning interval is factory-preset to 9 kHz (or
10 kHz for some areas). To change the AM tuning
interval, tune in any AM station first, then turn off the
system. Press and hold TUNING + and CD x. When
you change the interval, all the AM preset stations are
erased. To reset the interval, tune in any AM station
first, then turn off the system. Press and hold
TUNING – and CD x.
Tips
• The preset stations are retained for about a day even
if you disconnect the mains lead or if a power
failure occurs.
• To improve the reception, adjust the supplied
antennas or connect an external antenna.