Listening To The Radio; Preset Tuning; Manual Tuning; Using The Radio Data System - Sony NAS-CZ1 Operating Instructions Manual

Listening to the radio

You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station

— Preset Tuning

Preset radio stations in the tuner's memory first
(see "Presetting radio stations" on page 24).
1
Press TUNER BAND repeatedly to
select "FM" or "AM".
2
Press TUNING MODE repeatedly until
"PRESET" appears in the display.
3
Press TUNING + or – repeatedly to
select the desired preset station.
Listening to non-preset radio
station

— Manual Tuning

1
Press TUNER BAND repeatedly to
select "FM" or "AM".
2
Press TUNING MODE repeatedly until
"AUTO" and "PRESET" disappear from
the display.
3
Press TUNING + or – repeatedly to tune
in the desired station.
Tips
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
• When an FM stereo program has static noise, press
FM MODE repeatedly until "MONO" appears.
There will be no stereo effect, but the reception will
improve.
GB
26
Downloaded from ManualsNet.com search engine
Using the Radio Data
System (RDS)

(European model only)

What is the Radio Data
System?
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. RDS is available only on FM
stations.*
Note
RDS may not work properly if the station you are tuned
in is not transmitting the RDS signal properly or if the
signal is weak.
* Not all FM stations provide RDS service, nor do they
provide the same types of services. If you are not
familiar with the RDS system, check with your local
radio stations for details on RDS services in your
area.
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name appears in the display.
To check the RDS information
Each time you press DISPLAY, the display
changes cyclically as follows:
Station name* t Preset number and frequency
* If the RDS broadcast is not properly received, the
station name or the program type may not appear in
the display.