Programming The Cd Tracks; Program Play; Tuner; Presetting Radio Stations - Sony CMT-CP101 Primary Operating Instructions Manual

Programming the CD
tracks
–– Program Play
You can make a program of up to 24 tracks on
a CD in any order that you want.
1
Press FUNCTION repeatedly until "CD"
appears in the display.
2
Press PLAY MODE (or TUNING MODE/
PLAY MODE on the remote) repeatedly
until "PGM" appears in the display.
3
Press CD ./> repeatedly until the
desired track number appears in the
display.
3 243
Total playing time
Selected track
number
4
Press PLAY MODE (or TUNING MODE/
PLAY MODE on the remote).
The selected track is programmed.
The selection number appears in the
display.
5
To program additional tracks, repeat
steps 3 and 4.
6
Press CD u (or CD N on the remote).
To Do this
Cancel Program Play Press PLAY MODE (or
TUNING MODE/PLAY
MODE on the remote)
repeatedly until "PGM"
disappears from the display.
Add a track to the end Do steps 3 and 4 with
of the program Program Play stopped.
Press CD x with Program
Erase the entire
program Play stopped.
Tips
• The program you made remains after Program Play
finishes. To play the program again, switch the
function to CD, and then press CD u (or CD N
on the remote).
• "--.--" appears in the display when the total program
time exceeds 100 minutes.
PGM

Tuner

Presetting radio stations

You can preset up to 20 FM stations and 10
AM stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
There are two ways to store the station presets.
To
Method
Automatically tune
Automatic Tuning Preset
all of the stations
that can be received
in your area and then
store them manually
Manually tune and store
Manual Tuning Preset
the radio frequency of
your favorite stations
Setting presets through
automatic tuning
1
Press FUNCTION repeatedly until
"TUNER" appears in the display.
2
Press TUNER BAND to select FM or
AM.
3
Press TUNING MODE (or TUNING
MODE/PLAY MODE on the remote)
repeatedly until "AUTO" appears in the
display.
4
Press TUNING +/– (or m/M on the
remote).
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
"TUNED" and "STEREO" (for stereo
program only) appear.
If "TUNED" does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in steps 3 through 7 of
"Setting presets through manual tuning".
continued
GB
9