Advertisement
enable you to get the best performance from the amp and ensure its longevity.
READ THIS FIRST
Before using the BP-800 please read ALL the instructions.
On receipt of product, check for any signs of physical damage arising from shipping. If any
damage is visible, contact your retailer.
Keep all original packing.
Do not use this amplifier in a way that would compromise its ventilation system.
Never cover the amplifier while operating.
Do not place this amplifier near any heat source.
This amplifier must be connected only to a power source specified in this manual.
For safety do not leave the amplifier plugged into a power source for a long period of time
when it is not in use.
Do not let liquid or any foreign objects fall into any openings on the amplifier.
Never use this amplifier if it has:
1. Suffered any physical damage.
2. Been subjected to any liquids, rain or moisture.
3. Damaged cables connected to it.
If any of the above occurs, the amplifier should be examined by qualified service personnel.
Always operate this amplifier with the correctly rated fuse.
•
Never use this amplifier without proper grounding.
•
The mains plug is used as disconnect device, the disconnect device shall remain
readily operable.
•
Protective earthing terminal. The amplifier should be connected to a mains
socket outlet with a protective earthing connection.
Correct Disposal of this product. This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources.
Minimum distances should be over 15cm around the amplifier for sufficient ventilation. The
ventilation should not be impeded by covering the ventilation openings with items such as
newspapers, table-cloths, curtains, etc.
No naked flame sources, such as lighted candles, should be placed on the amplifier.
OVERVIEW OF THE BP-800 AMPLIFIER
The BP-800 is a high power 800 watt D-Class power amplifier and a pure class A single channel pre-
amplifier housed in a machined aluminum enclosure.
FEATURES
• A switchable input for active (high-output) and passive (high pickup impedance)
basses.
• Single switch ACTIVE/PASSIVE/MUTE.
Advertisement
