Thank you for your purchase of the PJB BP-200. The BP-200 is a result of our ongoing dedication and passion at PJB for designing innovative high-performance products for the musician. Reading this manual will enable you to achieve the optimum performance from the BP-200 and we hope many years of enjoyment and service.
Page 3
PASSIVE INPUT LEVEL VOLUME HEADPHONE INPUT BP-200 10 11 1.INPUT /MUTE SWICTH Top Position: Mute On Middle Position: Low sensitivity for mainly active basses. For basses with onboard electronics. Input matched for low signal to noise ratio and optimum transfer of electrical signal from modern high-end active basses.
Page 4
10. HEADPHONE OUT SOCKET We recommend the PJB H850 headphones as they were designed for bass and high-fidelity music reproduction. They are a perfect match to the BP-200. When a headphone is connected to the jack, the speaker output will be disconnected and the sound from you speakers will be muted.
If you hear that your speakers are distorting and the overload indicator is on, TURN DOWN THE VOLUME CONTROL! The BP-200 amplifier is rated as 210 watts into 4 ohms but that does not mean it is the maximum output power. This is the output power without audible distortion.
Treble shelf 10KHz, +-15dB. Weight: 2.6 lbs / 1.2 kg Dimensions: 6.9 in W x 2.1 in H x 6.7 in D (176 x 53 x 170 mm) The BP-200 comes with a 7 ft (1.8m) AC Grounded IEC Power Cord.
Further questions, please contact your local distributors, or PJB by email info@philjonespuresound.com. PHIL JONES BASS American Acoustic Development LLC 8509 Mid County Industrial Dr. St Louis, MO 63114 Tel: 855-227-7510 (855-BASS-510) www.pjbworld.com...
Page 8
American Acoustic Development LLC 8509 Mid County Industrial Dr. St Louis, MO 63114 WWW.PJBWORLD.COM Printed in China...