Timer; Falling Asleep To Music; Sleep Timer; Waking Up To Music - Sony CHC-TB20 Operating Instructions Manual

Timer

Falling asleep to music

— Sleep Timer

You can set the system to turn off after a
certain time, so that you can fall asleep to
music.
Press SLEEP on the remote.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
AUTO* t 90min t 80min t ... t 10min
t OFF
* The system automatically turns off after the current
CD or tape finishes playing (up to 100 minutes).
When the function is TUNER, the system turns off
after 100 minutes.
To Press
Check the SLEEP on the remote once.
remaining
time**
Change the SLEEP on the remote to select the
time to turn time you want.
off
Cancel the SLEEP on the remote repeatedly
Sleep Timer until "SLEEP OFF" appears.
function
**You cannot check the remaining time if you set to
"AUTO".

Waking up to music

— Daily Timer

You can wake up to music at a preset time.
Make sure you have set the clock (see "Setting
the clock" on page 8).
1
Prepare the sound source you want to
play.
• CD: Place a CD. To start from a
specific track, make a program (see
"Programing CD tracks" on page 10).
• Tape: Insert a tape.
• Radio: Tune in a station (see
"Listening to the radio" on page 15).
2
Press VOL + or – on the remote to
adjust the volume.
3
Press CLOCK/TIMER SET on the
remote.
"DAILY SET?" appears.
4
Press ENTER/YES.
"ON" appears and the hour indication
flashes.
5
Set the time to start playing.
Press . or > on the remote to set the
hour, then press ENTER/YES.
The minute indication flashes.
Press . or > on the remote to set the
minute, then press ENTER/YES.
6
Set the time to stop playing following
the procedure in step 5.
7
Press . or > on the remote to
select the desired sound source.
The indication changes as follows:
t TUNER y CD PLAY T
t TAPE PLAY T
continued
GB
23