CARE AND CLEANING
CLEANING THE BLENDER AND ACCESSORIES
Clean the Blender thoroughly after every use.
NOTE: To avoid damaging the Blender, do not immerse the blender base or cord in
water. To avoid scratching the Blender, do not use abrasive cleansers or scouring pads.
To clean the blender base and cord:
Unplug the Blender before cleaning.
Wipe the base and the cord with a
warm, damp cloth; wipe clean with a
damp cloth, and dry with a soft cloth.
16 | CARE AND CLEANING
Make sure to clean the blender jar,
lid, and ingredient-measuring
cap after each use. Remove any
remaining contents from the blender
jar using a spatula and rinse with
hot water. Fill jar with 700 mL of hot
water and add 3-4 drops of liquid
dishwashing detergent. Place the lid
on the blender jar, and make sure
the blender jar is fully in place on the