Preparing The Blender For Use - KitchenAid 5KSB6060 Manual

USING THE BLENDER

PREPARING THE BLENDER FOR USE

Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
Before using the Blender, be sure
the countertop beneath the Blender
1
and surrounding areas are dry and
clean. Then, plug the Blender into
an earthed outlet.
Before first use
Before using your Blender for the first time,
wipe the blender base with a warm, damp
cloth, then wipe clean with a damp cloth.
Dry with a soft cloth. Wash the blender jar,
lid, tamper, and ingredient-measuring cap
in warm, sudsy water (see the "Care and
cleaning" section). Rinse parts and wipe
dry.
The main power switch is on the
back of the blender base. Flip the
POWER switch to the On position.
The status indicator light above the
2
Start/Stop toggle switch will begin to
flash, indicating that the Blender is in
Standby mode. The Blender is now
ready to operate.
USING THE BLENDER | 13