Maxon TSD-4000 Series User Manual page 8

How to Charge
1. Make sure power adaptor for the Dual Slot charger is plugged into the charger and then plug the
power adapter for the TSA-0400 charger into a AC120V power outlet.
2. Turn off the radio before charging.
3. Insert radio into the charger's larger, front charging port with the charging contacts on the outside
of the radio lined up with the contacts on the charger. LED labeled F on the charger will turn on
when the connection is made.
4. If charging the battery only, line up the outside contacts of the battery with the charging contacts
on the 2nd, smaller charging slot in the rear of the dual charger and then insert the battery. LED
labeled R on the charger will turn on when the connection is made.
5. It is recommended to charge another 30 minutes after the LED turns green for a complete charge.
Status
Charging
Complete charging
Charger (TSA-0400)
LED indication
Red LED lights
Green LED lights
TSA-0400 Dual Slot Battery Charger and Power Adaptor
www.maxonamerica.com
Status
Detecting Error
Keep Charging
LED indication
Red LED blinks
Green LED lights
7