Page 1
11535 W. 83rd Terrace, Lenexa, KS 66214 Toll-Free: 800-456-2071 (US Only), 913-859-9515 Website: www.maxonamerica.com Printed in Korea Rev.201702A...
Page 2
User Manual TPD-8000 Series TPD-8124 (VHF) TPD-8424 (UHF) EXPERIENCE BEGINNING A NEW 11535 W. 83 Terrace, Lenexa, KS 66214 www.maxonamerica.com...
www.maxonamerica.com www.tecnetusa.com www.tecnetusa.com Table of Contents 1. Features 2. Specifications 3. Controls & LCD Display Controls Package Contents Button and LED Operations LCD Display Icons 4. Installation and Removal Antenna Installation and Removal Battery Installation and Removal Belt Clip Installation and Removal External Audio Accessory Jack 5.
The TPD-8000 Digital Radio was developed with the user in mind to provide a compact and rugged design with features to fit multiple types of jobs. The following are the main features of the TPD-8000 Series. Digital (Tier II - TDMA) or Analog Mode 512 Channel Capacity;...
www.maxonamerica.com 2. Specifications TPD-8124 (VHF) General 136~174 MHz Frequency Range ±1.0 ppm (-30 to +60°C) Frequency Stability 512; 16 Zones with 32 Channels per Zone Programmable Channels 25/20/12.5 kHz (Analog); 12.5 kHz/2 Time Slots 6.25 kHz (Digital) Channel Spacing Digital Protocol Tier II (ETSI TS 102 361) 3.89 x 2 x .82 (99mm x 51mm x 21mm) Dimensions (H/ W/D)
Page 7
TPD-8424 (UHF) General 380~420 MHz; 410~450 MHz; 440~470 MHz Frequency Ranges ± 1.0 ppm (-30 to +60°C) Frequency Stability 512; 16 Zones with 32 Channels per Zone Programmable Channels 25/20/12.5 kHz (Analog); 12.5 kHz/2 Time Slots 6.25 kHz (Digital) Channel Spacing Digital Protocol Tier II (ETSI TS 102 361) 3.89 x 2 x .82 (99mm x 51mm x 21mm)
www.maxonamerica.com Button & LED Operations Button & LED Operation Description Press and hold the power button for 3 seconds to power ON. Press and hold the power button for 3 seconds during use to power OFF. When powered ON Power ON/OFF short press returns to main screen.
LCD Display Icons Scan Mode Encryption mode Etiquette Mode (Vibration mode) Message Reception RF Output Button Locking Battery Capacity Display Received signal strength DM : Direct Mode RM : Repeater Mode D : Digital Zone Number A : Analog Channel Display Zone Display Numeric display Zone...
www.maxonamerica.com 4. Installation and Removal Antenna Installation and Removal To install the antenna, insert the antenna into antenna connector and screw the antenna clockwise. To remove the antenna, screw the antenna counter clockwise. 1. Do not over tighten the antenna as it may cause damage to the radio.
Belt Clip Installation and Removal Align the belt clip with the designated side slot and screw hole in frame. Tighten the screw as shown in Figure 4. Conversely, loosen the screw to remove the belt clip. Figure 4: Belt clip installation and removal External Audio Accessory Jack Open the accessory cover and align the accessory connector with the accessory jack.
www.maxonamerica.com 5. Charging the Battery Charging Direct into Radio - Open the flap to expose the USB Data/Charging Connector located on the bottom of the radio and connect the micro USB charging adaptor. See Figure 6. Connect the USB into a PC or applicable USB converter. Charging with Desktop Charger - Inset the micro USB into the charger base.
Language Screen Power Save Figure 8: TPD-8000 Series Menu Tree Certain settings for the eight (8) functions from the menu are enabled and disabled through the programming of the radio via the Programming Software (PS). Contact your Authorized Dealer for information.
Page 16
www.maxonamerica.com Contact List (Digital Mode Only) The Contact List provides a list of individuals, groups or all calls of which you can make a direct call. The lists of contacts are set within the radio by the PS. To initiate a call, select the Contacts section from the menu (or press the contact button for direct access), press the menu/enter button to see the list of contacts, press the keys to the desired contact and press the PTT...
Page 17
b) Inbox Text messages are shown initially on the screen. If you are in another mode or miss the message, the message icon will be displayed indicating a new message(s) has arrived. Select inbox from the message menu by pressing the menu/enter button to view the registered message(s).
Page 18
www.maxonamerica.com Lists - This section allows the viewing of the recorded messages and to play back each message. To play back a message, use the keys to the desired message and press the menu/enter button to play the recording. Delete All - This function provides the capability to delete stored recordings. To delete recordings, select Delete All from within the Voice Recording menu by pressing the menu/enter button, the question to Delete All will appear with the word “Yes?”...
Page 19
- Analog Mode BCL On & BCLO Off: If the current channel is busy, transmitting is prohibited. BCL On & BCLO On: Transmitting occurs when it matches the received tone. f. Keypad Lock This function locks the keypad to prohibit the accidental press of keys and buttons. When the keypad lock is enabled, all keys/buttons are locked except the PTT button, the emergency button, and power ON / OFF button.
www.maxonamerica.com 7. For Safe Operation •FCC RF EXPOSURE COMPLIANCE REQUIREMENTS FOR OCCUPATIONAL USE ONLY The Federal Communications Commission (FCC), with its action in General Docket 93-62, November 7, 1997, has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC regulated equipment.
. Maxon warrants each new radio product manufactured or supplied by it to be free from defects in material and workmanship under normal use and service for the time period stated, provided that the user has complied with the requirements stated herein.
Need help?
Do you have a question about the TPD-8000 Series and is the answer not in the manual?
Questions and answers