General Requirements, Warnings And Limitations; General Fall Protection Warnings - Honeywell Miller Vi-Go Manual Series User Instruction Manual

2.0 General Requirements,
War nings and Limitations

2.1 General Fall Protection Warnings

All warnings and instructions shall be
provided to authorized persons/users.
Warnings and instructions must be
read and understood prior to using
this equipment.
All authorized persons/users must
reference the regulations governing
occupational safety, as well as
applicable standards (i.e, ANSI or
CSA). Refer to product labeling
for information on specific OSHA
regulations, and ANSI and CSA
standards met by this product.
Proper precautions should always
be taken to remove any obstructions,
debris, material, or other recognized
hazards from the work area that could
cause injuries or interfere with the
operation of the system.
All equipment must be inspected
before each use according to the
manufacturer's instructions.
All equipment should be inspected by
a qualified person on a regular basis.
To minimize the potential for
accidental disengagement, a
competent person must ensure
system compatibility.
netzerotools.com
Us er Ins truc tion s - En gli s h
Equipment must not be altered in
any way. Repairs must be performed
only by the equipment manufacturer,
or persons or entities authorized, in
writing, by the manufacturer.
Any product exhibiting deformities,
unusual wear, or deterioration must be
immediately discarded.
Do not use if the unit or any part of the
system appears to be damaged.
Any equipment subject to a fall must be
removed from service.
The user shall have a rescue plan and
the means at hand to implement it
when using this equipment.
Never use fall protection equipment
for purposes other than those for
which it was designed. Fall protection
equipment should never be used for
towing or hoisting.
Never remove product labels, which
include important warnings and
information for the authorized person/
user.
4
netzerotools.com