Honeywell Miller Vi-Go Manual Series User Instruction Manual page 12

Connecting the Vi-Go Manual Cable Sleeve
to Full-Body Harness
The Vi-Go Manual Cable Sleeve is to be directly connected to the front attachment
point, designated for ladder climbing, of a Miller full-body harness using a Miller ap-
proved auto-locking carabiner or other Miller approved connector.
WARNING: The maximum length of the connector from the attachment
point on the harness to the cable must not exceed 9" (228mm).
1. Don a full-body harness according to the manufacturer's instructions. Check har-
ness to ensure that all straps are connected, buckles are secure, and harness is
adjusted to provide a snug fit.
body wear must be read and understood before using the equipment.]
2. Attach the cable sleeve to the front attachment point of the harness using a Miller
approved carabiner (or connector). Do not use connecting devices, such as a chain
assembly, quick link, or lanyard or substitute with non-Miller approved connectors.
3. Verify that the carabiner (or connector) keeper/gate is closed and locked.
Operating the Vi-Go Manual Cable Sleeve
To ascend, climb the ladder in normal fashion. The cable sleeve will follow automati-
cally.
As the cable sleeve encounters the Intermediate
Manual Pass-Through Cable Guides, snap the
cable out of the cable guide. Once the cable
sleeve has passed the cable guide, reconnect
the cable into the cable guide.
WARNING: DO NOT REMOVE CABLE
SLEEVE FROM CABLE TO PASS
INTERMEDIATE CABLE GUIDES.
To descend, climb down the ladder in normal
fashion with torso centered and close to the
device. This will keep the attachment lever up,
disengaging the clamping bar and allowing the
device to move freely down the cable. Lean-
ing too far back will cause the cable sleeve to
lock onto the cable. To unlock the cable sleeve,
move upward slightly. This will release the
device from the cable and allow the climber to
descend the ladder.
When climbing is completed, remove the cable
sleeve and properly store according to the main-
tenance instructions in this manual.
netzerotools.com
U se r In str uc ti on s - E n gl i s h
[NOTE: All instructions and warnings provided with the
11
netzerotools.com