Before First Use; The Autodose Technology (Autodosing) - AEG L6FBG841CA User Manual

20 www.aeg.com

6. BEFORE FIRST USE

During installation or before
first use you may observe
some water in the appliance.
This is a residual water left in
the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.

7. THE AUTODOSE TECHNOLOGY (AUTODOSING)

Read this chapter carefully.
7.1 Introduction
Right detergent and fabric softener
dosage takes better care of the laundry
and ensuring good wash performances.
Too much detergent damages your
clothes and too little doesn't ensure
good wash performances.
This appliance is equipped with an auto
dosing system able to automatically
provide the right detergent and fabric
softener dosage to preserve the fabric
integrity and colour brightness.
AutoDose status indicator. It lights when AutoDose functionality for ad-
ditives is disable.
Linked mode indicator. It lights when both compartments are linked
and filled with the same detergent. AutoDose functionality for softener,
is disable.
3. Make sure to fill the AutoDose tanks
with liquid detergent
softener . Refer to "AutoDose
basic setting " paragraph in "The
AutoDose technology" chapter.
4. Pour 2 litres of water inside the drum.
This action activates the drain system.
5. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
AutoDose detergent tank.
AutoDose fabric softener tank.
The appliance is pre-set by the factory
to suit most users habits.
Once started the programme, the
appliance will automatically release the
right amount of detergent and softener
according to the real fabric load, if the
indicators and/or
display.
and fabric
are on in the