Remote Start; Over-The-Air Update - AEG L6FBG841CA User Manual

32 www.aeg.com
5. If the connectivity is configured,
when the programme information
screen returns, the indicator
the display.
Every time you switch the
appliance on, the appliance
takes 45 seconds to connect
to the network automatically.
When the indicator
blinking the connection is
ready.
To switch the wireless connection off,
press and hold the
buttons for a few seconds simultaneously
until the first acoustic signal:
appears on the display for 5 seconds.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
press and hold the
buttons for at least 10 seconds
simultaneously until the second acoustic
signal:
9.3

Remote Start

The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Start/Pause
programme, but it is also
possible to start a washing
programme remotely.
When the App is installed and the
wireless connection is complete, you can
activate the Remote Start:
stops
and the
and the
appears on the display.
button to start the
1. Touch the Remote
indicator
is on
for a few seconds.
2. Touch the Start/Pause
activate the Remote Start before the
indicator
The indicators
programme summary screen and the
door is locked. Now it is possible to start
the programme remotely.
When touching the Start/
Pause
indicator
blinking, the Remote Start is
not activated, but the set
programme starts.
To remove the Remote Start, tap on
the Remote
pressing the Start/Pause

9.4 Over-the-air update

The App may propose an update for
downloading new features.
The update is accepted via App only.
If a programme is running, the App
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
in the display.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
button and the
blinks on the display
button to
stops blinking.
and appear on the
button after the
stops
button and confirm by
button.