Cancelling A Running Programme; Programme Phase Indicators; Opening The Door; Adding Garments - AEG L6FBG841CA User Manual

Important! If the laundry amount will not
be reduced, the washing programme
starts anyway, despite the overload. In
this case, it will be not possible to
guarantee the best washing results.
About 20 minutes after the
programme start, the
programme duration could
be adjusted again
depending on the capacity
of water absorption of the
fabrics.
The ProSense detection is
carried out with complete
washing programmes only
(no skipping phase
selected).
10.8 Programme phase
indicators
When the programme starts the indicator
of the running phase flashes and the
other phase indicators are steady on.
E.g. the washing or pre wash phase is
running: .
When the phase ends the relevant
indicator stops flashing and is steady on.
The next phase indicator starts flashing.
E.g. the rinse phase is running:
10.9 Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
1. Touch the Start/Pause
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Start/Pause
again.
The washing programme continues.
10.10 Cancelling a running
programme
1. Press the On/Off button to cancel
the programme and to deactivate
the appliance.
2. Press the On/Off button again to
activate the appliance.
Now, you can set a new washing
programme.

10.11 Opening the door -

Adding garments

While a programme or the delay start
operates, the appliance door is locked.
.
1. Touch the button Start/Pause.
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the button
button.
Start/Pause.
The programme or the delay start
continues.
4. The door can be opened when the
programme is complete, or set
button
Drain/Spin programme and than
press Start/Pause button.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating
the ProSense phase. The
water and the detergent are
not drained out in order to
avoid waste. The display
shows the maximum
duration of the programme,
updating it about 20 minutes
after the starting of the new
programme.
If the temperature and level
of the water in the drum are
too high and/or the drum
still rotates you cannot open
the door.
ENGLISH 35