To A Stand Pipe With Vent-Hole; Product Description; Special Features - AEG L6FBG841CA User Manual

10 www.aeg.com
Make sure that the plastic
guide cannot move when
the appliance drains.
Make sure that the drain
hose end is not immersed in
the water. There may be a
return of dirty water into the
appliance.

3. To a stand pipe with vent-hole -

Insert the drain hose directly into a
drain pipe. Refer to the illustration.
The end of the drain hose
must always be ventilated ,
i.e. the inner diameter of the
drain pipe (min. 38 mm -
min. 1.5") must be larger
than the external diameter
of the drain hose.
4. If the end of the drain hose looks like
this (see the picture), you can push it
directly into the stand pipe.

4. PRODUCT DESCRIPTION

4.1 Special features

Your new washing machine meets all
modern requirements for an effective
treatment of laundry with low water,
5. Without the plastic hose guide, to
a sink spigot - Put the drain hose in
the spigot and tighten it with a
clamp. Refer to the illustration.
Make sure that the drain
hose makes a loop to
prevent particles going into
the appliance from the sink.
6. Position the hose directly to a built-
in drain pipe in the room wall and
tighten it with a clamp.
energy and detergent consumption and
proper care of fabric.
• The AutoDose technology
automatically dispenses the right