ROBAND 40DT Operating Instructions Manual
Pie & food warmers
Hide thumbs
Also See for 40DT:
- Operating instructions manual (20 pages) ,
- Instruction manual (8 pages)
Table of Contents
Advertisement
Quick Links
OPERATING INSTRUCTIONS
These instructions cover the models of ROBAND
slight variances between models, the installation, operation, care and maintenance procedure is
the same for all.
Manufactured By
ROBAND AUSTRALIA PTY LTD
PIE & FOOD WARMERS
Models
Special Models
40DT, 80DT Version 1
83DT
Version 2
83DTS2
Version 1
®
Pie & Food Warmers only. Although there are
8/09/2014
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ROBAND 40DT
Summary of Contents for ROBAND 40DT
- Page 1 Version 2 Special Models 83DTS2 Version 1 ® These instructions cover the models of ROBAND Pie & Food Warmers only. Although there are slight variances between models, the installation, operation, care and maintenance procedure is the same for all. 8/09/2014...
- Page 2 Soup/Rice Warmers, Robatherm Urns, ö ® Austheat Fryers, Dipo Induction & Autofry Machines. Roband also has its own line of ® commercial cookware and cutlery under the Robinox brand name. For a complete set of brochures please contact your nearest authorised dealer or contact Roband directly at our head office.
-
Page 3: Table Of Contents
CONTENTS INTRODUCTION ..................... 1 GENERAL PRECAUTIONS ..................1 PACKAGING ......................2 COMPLIANCE ......................2 INSTALLATION ....................... 3 OPERATION......................4 GENERAL SAFETY ....................5 CLEANING, CARE & MAINTENANCE ..............6 TROUBLESHOOTING ..................... 7 SPECIFICATION ..................... 8 CIRCUIT DIAGRAM....................9 EXPLODED DIAGRAM ..................10 APPENDIX A ...................... -
Page 4: Introduction
Always be careful when near an operating Soup Kettle, and ensure that any risk to unwary customers or staff is minimised with additional signage if necessary. Due to the obvious heat hazard Roband recommends that these units be kept out of reach of children. -
Page 5: Packaging
PACKAGING All care is taken when packing and Roband ensures that every unit is functional and undamaged at the time of packaging. The Package of this Pie Warmer should include: One Pie Warmer (appropriate model) – includes shelves and crumb tray... -
Page 6: Installation
INSTALLATION Remove all the packaging materials and tape, as well as any protective plastic from the machine. Clean off any glue residue left over from the protective plastic or tape using methylated spirit. Place the warmer on a firm, level surface in the required position. As a precaution, it is recommended that all non-metal bench top surfaces be protected from heat with some form of insulation. -
Page 7: Operation
OPERATION The pie warmer is thermostatically controlled. Rotate the thermostat knob to select the desired operating temperature, usually about 85-90°C for pies and sausage rolls. The thermostat will then cycle on and off to maintain the set temperature. The pilot light will also cycle on and off, indicating when the warmer is being heated and when the set temperature has been reached. -
Page 8: General Safety
SAFETY GENERAL SAFETY This machine contains no user-serviceable parts. Roband Australia, one of our agents, or a similarly qualified person(s) should carry out any and all repairs. Any repair person(s) should be instructed to read the safety warnings within this manual before commencing work on these units. -
Page 9: Cleaning, Care & Maintenance
Do not immerse the unit in water or allow the ingress of water into the ventilation holes or controls. For the 40DT and 80DT, the drawers can be removed by sliding them out. For the 83DT, the steel doors are removable. To remove them, lift them up, then slide them downwards and out. -
Page 10: Troubleshooting
TROUBLESHOOTING If the Pie Warmer does not function check the following points before calling for service. The machine is plugged in correctly and the power switched on. The power point is not faulty. The thermostat is not in the “OFF” position. ... -
Page 11: Specification
SPECIFICATION Model 40DT 80DT 83DT Power Source 220-240 Volts AC 220-240 Volts AC 220-240 Volts AC Power 1050-1250 Watts 1050-1250 Watts 1050-1250 Watts Consumption Nominal Dimensions Width 505mm 585mm 585mm Height 360mm 485mm 485mm Depth 320mm 350mm 350mm Constant Research & Development may necessitate machine changes at any... -
Page 12: Circuit Diagram
CIRCUIT DIAGRAM Models: 40DT, 80DT & 83 DT Note: This circuit diagram has been provided for reference and to assist qualified service and repair agents only. Under no circumstances should persons not suitably qualified attempt repairs to any electrical equipment. -
Page 13: Exploded Diagram
EXPLODED DIAGRAM 40DT Page: 10... - Page 14 If you are unable to locate a circuit without an RCD please contact your supplier, or if you prefer you can contact Roband and send the unit to one of our offices where we can run the machine on a suitable circuit free of charge (a return freight charge may apply).
-
Page 15: Warranty
Any repairs or replacement of defective goods or materials pursuant to this warranty, must be authorized by Roband Australia prior to any action being taken. The company reserves the right to reject a claim for warranty if it is not completely satisfied with the circumstances under which it occurred and any other costs incurred for false claims or faults due to incorrect usage etc. - Page 16 OTHER LEADING PRODUCTS AVAILABLE: -PLUS DRINK MIXERS PIE & FOOD WARMERS HIGH PERFORMANCE DEEP FRYERS VITAMIX BLENDERS NOAW Slicers GRILLMAX TOASTERS Manufactured/Imported in Australia by: Authorised Distributor/Agent...
Need help?
Do you have a question about the 40DT and is the answer not in the manual?
Questions and answers