Table of Contents
Advertisement
Quick Links
OPERATING INSTRUCTIONS
Halogen Heat Lamps
Ultra-Durable Stainless Steel Elements
Easy clean Tank
These instructions cover the models of ROBAND
variances between models, the installation, operation, care and maintenance procedure is the
same for all.
Manufactured By
ROBAND AUSTRALIA PTY LTD
CHIP WARMER
Models
CW10
CW10-UK
Special Features:
Version 3
Version 1
Chip Warmer only. Although there are slight
®
13/05/2015
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ROBAND CW10
Summary of Contents for ROBAND CW10
-
Page 1: Operating Instructions
Halogen Heat Lamps Ultra-Durable Stainless Steel Elements Easy clean Tank These instructions cover the models of ROBAND Chip Warmer only. Although there are slight ® variances between models, the installation, operation, care and maintenance procedure is the same for all. - Page 2 ö ® Soup/Rice Warmers, Robatherm Urns, Austheat Fryers, Dipo Induction & Autofry Machines. Roband also has its own line of commercial cookware and cutlery under the ® Robinox brand name. For a complete set of brochures please contact your nearest authorised dealer or contact Roband directly at our head office.
-
Page 3: Table Of Contents
CONTENTS INTRODUCTION ..................... 1 GENERAL PRECAUTIONS ..................1 PACKAGING ......................2 COMPLIANCE ......................2 INSTALLATION ....................... 3 OPERATION......................4 GENERAL SAFETY ....................5 CLEANING, CARE & MAINTENANCE ..............5 TROUBLESHOOTING ..................... 6 SPECIFICATION ..................... 6 CIRCUIT DIAGRAM....................7 EXPLODED DIAGRAM .................... 8 TOASTING ADVICE .................... -
Page 4: Introduction
Chip Warmer, and ensure that any risk to unwary customers or staff is minimised with additional signage if necessary. Due to the obvious heat hazard Roband recommends that these units be kept out of reach of children. Do not allow children to play with these units. -
Page 5: Packaging
PACKAGING All care is taken when packing and Roband ensures that every unit is functional and undamaged at the time of packaging. The Package of this Chip Warmer should include: One Chip Warmer Chip Warming Tray This Manual Packaging Materials... -
Page 6: Installation
INSTALLATION Remove all the packaging materials and tape, as well as any protective plastic from the machine. Please note the two stainless steel packing ribs used to support the lamp assembly are disposable and not needed in the function of the machine. Clean off any glue residue left over from the protective plastic using methylated spirit. -
Page 7: Operation
OPERATION A green rocker switch turns the chip warmer on and off. The chip warmer element and heat lamps are controlled individually. The element is controlled by an energy regulator. The heat lamps are switched on with a black rocker switch located on the control panel. -
Page 8: General Safety
SAFETY GENERAL SAFETY This machine contains no user-serviceable parts. Roband Australia, one of our agents, or a similarly qualified person(s) should carry out any and all repairs. Any repair person(s) should be instructed to read the Safety warnings within this manual before commencing work on these units. -
Page 9: Troubleshooting
Only after all these points have been checked should you call for service. SPECIFICATION Width Depth Power Power Height Model Source Rating CW10 & 230 Volts 1750 Watts CW10-UK Constant research and development may necessitate specification changes at any time Page: 6... -
Page 10: Circuit Diagram
CIRCUIT DIAGRAM Models: CW10 NOTE: This circuit diagram has been provided for reference and to assist qualified service and repair agents only. Under no circumstances should a person not suitably qualified attempt repairs to any electrical equipment. Page: 7... -
Page 11: Exploded Diagram
EXPLODED DIAGRAM Model: CW10 Page: 8... -
Page 12: Toasting Advice
TOASTING ADVICE An excerpt from an article published by Roband Australia Regardless of the brand, any radiant heat toaster will run into problems when faced with the nasty prospect of fresh bread. The reason for this is simple; the high moisture content in fresh bread acts to counter the toasting effect. -
Page 13: Appendix A
If you are unable to locate a circuit without an RCD please contact your supplier or contact Roband or our Agent for alternative suggestions. Page: 10... -
Page 14: Ec Declaration Of Conformity
DECLARATION I hereby declare under our sole responsibility that the product mentioned above to which this declaration relates complies with the above-mentioned standard(s). Roband Australia has appointed Valera Ltd as our EU Authorised Representative of : 5-7 The Glade Business... -
Page 15: Warranty
® claimant. Under no circumstances shall Roband Australia Pty Ltd or any subsidiary company or Agent be liable for loss of profit or damage to other equipment and property. - Page 16 OTHER LEADING PRODUCTS AVAILABLE: -PLUS DRINK MIXERS PIE & FOOD WARMERS HIGH PERFORMANCE DEEP FRYERS VITAMIX BLENDERS NOAW Slicers GRILLMAX TOASTERS Manufactured/Imported in Australia by: Authorised Distributor/Agent...
Need help?
Do you have a question about the CW10 and is the answer not in the manual?
Questions and answers