HOT DOG UNIT Models: M3, M3T Version 1 ® These instructions cover the models of ROBAND Hot Dog Units only. Although there are slight variances between models, the installation, operation, care and maintenance procedure is the same for all. 19/11/2014...
Page 2
Soup/Rice Warmers, Robatherm Urns, ö ® Austheat Fryers, Dipo Induction & Autofry Machines. Roband also has its own line of ® commercial cookware and cutlery under the Robinox brand name. For a complete set of brochures please contact your nearest authorised dealer or contact Roband directly at our head office.
Always be careful when near an operating Bun Warmer, and ensure that any risk to unwary customers or staff is minimised with additional signage if necessary. Due to the obvious heat hazard Roband recommends that these units be kept out of reach of children.
PACKAGING All care is taken when packing and Roband ensures that every unit is functional and undamaged at the time of packaging. The Package of these grills should include: One Hot Dog Unit (appropriate model, includes Hot Dog dividing rack)
For the models M3 & M3T, plug the grill into a standard, single phase, 10Amp power point. Please note that these machines should not be considered as portable and no attempt should be made to move them while they are operating or with the tank full of water.
Dupont Ltd and is applied by a specialist in such coatings. However, neither Roband Australia Pty Ltd nor Dupont Ltd is able to guarantee the performance or longevity of these coatings other than for faulty workmanship.
GENERAL SAFETY This machine contains no user-serviceable parts. Roband Australia, one of our agents, or a similarly qualified person(s) should carry out any and all repairs. Any repair person(s) should be instructed to read the Safety warnings within this manual before commencing work on these units.
CLEANING, CARE & MAINTENANCE Attention to regular care and maintenance will ensure long and trouble free operation of your Hot Dog Unit. Although scheduled servicing is not required we do recommend you adopt a program of regular maintenance to ensure that the Hot Dog Unit is clean and functional and to avoid inadvertently damaging the unit.
The energy regulator knob is not loose or broken, rendering the energy regulator inoperable. Check Appendix A on page 9 of this manual on RCD’S SPECIFICATIONS Model M3 & M3T Power Source 240Volts AC Power Rating 1000 Watts...
CIRCUIT DIAGRAM Models: M3 & M3T NOTE: This circuit diagram has been provided for reference and to assist qualified service and repair agents only. Under no circumstances should person’s not suitably qualified attempt repairs to any electrical equipment. Page: 8...
If you are unable to locate a circuit without an RCD please contact your supplier, or if you prefer you can contact Roband and send the unit to one of our offices where we can run the machine on a suitable circuit free of charge (a return freight charge may apply).
Page 13
NOTES This page is intentionally left blank. Please note your favourite settings here. Page: 10...
Page 14
NOTES This page is intentionally left blank. Please note your favourite settings here. Page: 11...
Any repairs or replacement of defective goods or materials pursuant to this warranty, must be authorized by Roband Australia prior to any action being taken. The company reserves the right to reject a claim for warranty if it is not completely satisfied with the circumstances under which it occurred and any other costs incurred for false claims or faults due to incorrect usage etc.
Page 16
OTHER LEADING PRODUCTS AVAILABLE: -PLUS DRINK MIXERS PIE & FOOD WARMERS HIGH PERFORMANCE DEEP FRYERS VITAMIX BLENDERS GRILLMAX TOASTERS NOAW Slicers Manufactured/Imported in Australia by: Authorised Distributor/Agent...
Need help?
Do you have a question about the M3 and is the answer not in the manual?
Questions and answers