Clock - Keysight Technologies 81133A User Manual

Pulse generator

Hide thumbs Also See for 81133A:

Table of Contents

Timing of Generated Signals

Characteristics

Keysight 81133A/81134A Pulse Generator User's Guide, April 2015

Clock

The following figure shows the typical timing for the clock signal.

• Pulse periods are generated continuously where:

– Delay and deskew of all channels is zero.

– The duty cycle is fixed at 50%.

• The instrument mode is Pulse/Pattern.

• The pattern mode is Square.

• For the clock source, you can select from:

– Internal (YIG Oscillator)

– External signal at Clock Input

– External 10 MHz Reference at Clock Input

– Direct Internal

– Direct External at Clock Input

For more information about the clock sources, see

Sources" on page

75.

• The Trigger Out is generated with every clock pulse, but can be

optionally divided by any number in the range 1 ... 2

"Trigger Out" on page

81134a