Table of Contents
Advertisement
Setting Up Generic and Advanced Signals
Setting Up a Repetitive Burst Signal
Setting Up a Repetitive Burst
Signal
Task
Set up a signal with 4 repeated bursts.
Each burst consists of a 32-bit pattern signal with NRZ data
output format at 100 MHz to check a digital circuit with LVPECL
logic.
The data pattern is:
11100000000000000000000000000000
Using the Graphical User Interface
Instrument Settings
To set the instrument parameters:
1 Disable the outputs.
2 In the instrument panel, choose the RBurst mode.
3 Enter 4 for the number of null data packets.
4 Define that the number of zeros that follows the repeated bursts
is as large as the burst length.
5 Set the frequency to 100 MHz.
54
Keysight 81133A/81134A Pulse Generator User's Guide, April 2015
Advertisement
Table of Contents
