4
Adjust the volume.
Press VOLUME +/
To check the address of a connected
Bluetooth device
Press DISPLAY
device name appears in the system
display.
The Bluetooth device address appears for
8 seconds.
To cancel the connection with a
Bluetooth device
Press and hold BLUETOOTH OPR
on the unit for about 2 seconds until
"Disconnect" appears, or until the
information on the display (device name,
etc.) disappears.
Other operation
To
Pause playback
Stop playback
Select a file
Find a point in
a file
GB
.
while the Bluetooth
Press
.
.
/
.
Hold down /
.
Note
These operations may not be available for
certain Bluetooth devices. In addition, the
actual operations may differ depending on the
connected Bluetooth device.
Notes on connections with Bluetooth
devices
If you cannot connect with a paired
Bluetooth device, perform the pairing
operation between the system and the
Bluetooth device again.
Depending on the type of Bluetooth device,
you can adjust the volume using the controls
of the Bluetooth device.
When BLUETOOTH
is pressed while connected to Bluetooth
headphones, it may take some time until
a connection is made to the system from
another Bluetooth device.
on the unit