Adjust The Volume - Sony CMT-BX50BTi Operating Instructions Manual

Playing music on this system
You can operate this system from
Bluetooth headphones by connecting the
system and Bluetooth headphones using
AVRCP.
1
Select a function other than the
Bluetooth function.
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
2
Establish a connection with the
Bluetooth headphones.
Press and hold BLUETOOTH
the unit for about 2 seconds until the
BLUETOOTH indicator
then release the button.
Sound output from the speakers is
stopped.
If more than one Bluetooth device
that has been connected in the past
is present around the system, the
system attempts to connect with up
to 3 most recently connected devices.
(Connection is attempted with up
to 3 devices in order from the most
recently connected device, and the
attempts end when a connection is
established.)
Once the connection is established,
the system display changes as follows:
"Connect"  Name of the Bluetooth
device
3
Start playback of the music for
the function selected in step 1.
Depending on the type of Bluetooth
headphones, you can operate this
system (playback, volume control,
etc.) using the headphone's controls.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
0
GB
4
To cancel the connection with
Bluetooth headphones
Press and hold BLUETOOTH
the unit for about 2 seconds until the
BLUETOOTH indicator

Sound is output from the speakers.
Notes
 If you cannot connect with paired Bluetooth

on
 When the system is changed to a function

lights up,
 This system stores separate volume settings
 Use the A2DP-capable or A2DP- and

Adjust the volume.

Press VOLUME +/ (or VOL +/ on

the unit) .
headphones, perform the pairing operation
between the system and the Bluetooth
headphones again.
other than the Bluetooth function and

BLUETOOTH on the unit is pressed
while connected to a Bluetooth device, it may
take some time until a connection is made
with the Bluetooth headphones.
for when listening through the speakers

or PHONES jack on the unit, or when
listening through Bluetooth headphones.
AVRCP-capable Bluetooth device with the
system in a peer-to-peer environment.

on

turns off.