Sony 3-097-196-14(1) Operating Instructions Manual page 23

About DVD VIDEO software types and
the conversion method
The DVD VIDEO software can be
divided into 2 types:
 Film-based software
Film-based software is derived from
film and displays the images at 24
frames per second.
 Video-based software
Video-based software is derived from
TV, such as dramas and sitcoms and
displays images at 30 frames or 60
fields per second.
Some DVD VIDEO contains both types
of software. In order for these images to
appear in your TV naturally when the
video output is in progressive format, the
progressive signals need to be converted
to match your DVD VIDEO software.
Note
There would be no image on your TV or the
image is not clear if your setting does not
match your TV or connection.
When using a TV
Turn on the TV and select the video
input so that you can view the pictures
from this system.
Operating a Sony TV
You can use the following buttons to
operate a Sony TV. These buttons have
been marked in orange.
To Press
TV /
Turn the TV on
or off holding down TV

Switch the TV's TV/VIDEO
input source while holding down
between the TV TV
and other input
sources
Select the TV TV CH +/
channels or numeric
buttons
holding down TV

Adjust the TV VOL +/
volume of the TV while holding down
speaker(s) TV
* For double digit number, hold down TV

and press -/-- , then press the number.
(For example, hold down TV

press -/-- , then 2 and 5 for entering 25.)

while
.


.


* while
.


.


,

GB