Porsche PCM Compatibility And Connection page 30

FAQ
Questions about PCM with telephone module
What are the differences between PCM
with telephone module and PCM with mobile
phone preparation?
The PCM system with telephone module,
which is supplied in many markets with the new
Connect Plus option, is a data modem that
provides a data connection for the use of online
services. It requires a SIM card to be inserted
directly into PCM. In some markets, it is also
possible to use the telephone module for phone
calls. The PCM telephone module is also
connected to a WiFi hotspot, which can be used
to access the Internet provided there is an
active data connection for the available devices
(mobile phones, tablets).
Which mobile phones can I use to operate
PCM with telephone module?
In principle, all mobile phones with at least
the Handsfree Profile (HFP).
Can I use two SIM cards at the same time?
No, this is not possible.
There is a detailed functional overview of mobile phone models that have been compatibility-tested by Porsche, starting on page 45. An explanation of the terms used here can be found in the glossary, starting on page 40.
30
Which functions does PCM with telephone
module support?
With the new Connect Plus option in many
markets, you are getting a telephone module
that is primarily intended to establish a data
connection for the use of data services. In some
markets, it is also possible to make calls via the
telephone module. In such cases, the following
functions can be used:
pairing of a mobile phone with search
initiated from the car or phone (NB: if you
want to make calls via the telephone
module, you must be connected via the
Bluetooth® SIM Access Profile (SAP).
Please initiate the pairing from your PCM)
automatic connection of a paired device
at system start-up
basic phone functions (making, receiving
and ending calls)
hands-free capability via the in-car system
status displays such as network name
and signal strength
◀
transfer of phone book contacts and call
lists, as well as text and e-mail messages,
from the mobile phone or from the inserted
SIM card
sending and receiving of text and
e-mail messages
sending of DTMF tones
starting and ending a second call,
call toggling and conference calling
The PCM telephone module is also connected
to a WiFi hotspot, which can be used to access
the Internet provided there is an active data
connection for the available devices (mobile
phones, tablets).
Can I remove the ignition key during
a telephone call?
Yes. You can park the vehicle and remove the
ignition key during a call. PCM remains on until
you or the person on the other end actively
terminates the call. If your mobile phone is
CONTENTS
connected to PCM via the Handsfree Profile
(HFP), you can transfer the call to your mobile
phone after parking the car and continue the
call outside.
Can the inserted SIM card also be used
to make calls?
Yes. In some markets, a SIM card inserted into
PCM can also be used for making calls. The user
can select this option when inserting a new
SIM card into PCM. This option can also be
retrospectively enabled or disabled via 'PHONE/
OPT/SET PHONE/Telephone'. If in these cases a
mobile phone is connected via the Bluetooth®
SIM Access Profile (SAP), the telephone module
voice connection is always used, as well as
the data connection.