7
k9 2400
-26
(1) Filler Plug
4. Clean around filler plug, then re-
move the filler plug.
5. Check that the gearbox surface is
not hot. Then, check the oil level
and condition with a finger bent
slightly. If you cannot reach the oil,
it means the oil level is low. add oil
as needed to fill.
6. If the color or viscosity of the oil is
not normal or it is at the oil change
interval, change the oil.
UD200(K9 2400)-유럽향-07.indd 26
U24O746a
(1) Drain Plug
7. To change oil, place a container
with wide opening under the drain
plug. Then, remove the drain plug.
8. after draining all the oil, install the
drain plug firmly.
9. W h e n a d d i n g n e w o i l , a d d i t
through a long hose into the fill
plug location. Fill until oil starts to
spill out of filler plug hole.
U24O717a
(1) Funnel
Oil Capacity
0.2 U.S Gal. (0.9 l)
10. Check the oil level by performing
the step 5 in the previous page.
If the oil level is normal, install
the filler plug.
11. Wipe the gearbox and is sur-
rounding with a rag thoroughly.
12. Test drive the vehicle for 5 to 10
minutes to check for leakage.
U24O745a
2017-11-13 오전 11:10:44
Need help?
Do you have a question about the K9 2400 and is the answer not in the manual?