Key Tone On/Off - Cobra microTALK RX680 Owner's Manual

Ten Call Tone Settings
You can choose between ten different Call Tone Settings to transmit
a call alert.
To change a call tone setting:
Mode Button
1. Press the Mode button until the letter "C" and the
current call tone number (01 through 10) is displayed.
The current call tone will sound for three seconds.
2. Press the Up or Down button to hear the other call
Up/Down Button
tone settings.
3. Choose one of the following:
a. Press the Mode button to enter the new setting and
proceed to other functions.
Call Tone Setting
b. Press Talk or Call/Lock button to enter the new
setting and return to Standby mode.
c. Do not press any buttons for 6 seconds to enter the
new setting and return to Standby mode.
VibrAlert and Call Alert
®
Your microTALK radio can alert you to incoming signals by sounding an
®
audible call tone only or both with vibrating.
To change call settings:
Call Tone On/
Vibrate On
1. Press the Mode button until the Call Setting icon
ashes on the display. The current setting ("01"
vibrate + ring, "02" ring only) is displayed.
2. Press the Up or Down button to change the call
setting.
Call Tone On/
Vibrate Off
3. Choose one of the following:
a. Press the Mode button to enter the new setting and
proceed to other functions.
b. Press Talk or Call/Lock button to enter the new
setting and return to Standby mode.
c. Do not press any buttons for 6 seconds to enter
the new setting and return to Standby mode.
Note: Vibra Alert will be suspended during
charging.
12
Roger Beep Con rmation Tone
Your listener will hear an audible tone when you release the Talk button. This
alerts the other party that you are nished talking and it is OK for them to
speak.
To turn roger beep on or off:
Mode Button
1. Press the Mode button until the Roger Beep icon
ashes. The current on or off setting is displayed.
2. Press the Up or Down button to select Roger Beep on
or off.
Up/Down Button
3. Choose one of the following:
a. Press the Mode button to enter the new setting and
proceed to other functions.
b. Press Talk or Call/Lock button to enter the new
Roger Beep Icon
setting and return to Standby mode.
c. Do not press any buttons for 6 seconds to enter the
new setting and return to Standby mode.

Key Tone On/Off

When Key Tone is On, an audible tone will sound each time a button is
pressed.
To turn key tone on or off:
Mode Button
1. Press the Mode button until Key Tone icon ashes.
Current key tone status on or off will ash.
2. Press the Up or Down button to select key tone
on or off.
Up/Down Button
3. Choose one of the following:
a. Press the Mode button to enter the new setting and
return to Standby mode.
b. Press Talk or Call/Lock button to enter the new
setting and return to Standby mode.
Key Tone Icon
c. Do not press any buttons for 6 seconds to enter the
new setting and return to Standby mode.
13