Using The Sanitization Function - HP HC271p User Manual

Upon entering this reduced power state (sleep mode), the monitor screen is blanked, the backlight is turned
off, and the power light turns amber. The monitor draws less than 0.5 W of power when in this reduced power
state. The monitor will wake from sleep mode when the computer sends an active signal to the monitor (for
example, if you activate the mouse or keyboard).
You can disable Auto-Sleep Mode in the OSD menu. Press the
open the OSD menu. In the OSD menu select Power Control, select Auto-Sleep Mode, and then select Off.

Using the sanitization function

Use the sanitization function to log sanitization events.
Table 2-3 Sanitization events and descriptions
Menu choice
Enable sanitization log
Update sanitization log
View sanitization log
Hours since last sanitization
Show alert message when hourly schedule is exceeded
Set hourly alert schedule
Menu button on the monitor's front panel to
Description
When the check box is selected (default setting), all sanitization
log functions are enabled.
Places an entry in the first sanitization log list and resets the
timer.
Displays the first 27 sanitization log entries.
Displays the number of hours since the last sanitization log entry.
When the check box is selected (default is cleared), it enables the
set hourly alert schedule function and will display an Update
Sanitization Log message on the screen.
Allows the user to set the number of hours between sanitization
log updates. When that number of hours expires, an Update
Sanitization Log message will appear on the monitor.
Using the sanitization function 21