Table of Contents
Advertisement
Confirming/saving the
measurement results
1
Confirm the measurement
result.
When the measurement ends, a beep
sounds and the measurement result
appears on the display.
Measurement
Display
result
When the
COMPLETE Proceed to step
measurement
process
completes
properly
When the
ERROR
CODE XX
measurement
process fails
2
Press V/v repeatedly to select
the item, then press
Item
Explanation
RETRY
Re-performs the auto
calibration.
SAVE EXIT
Saves the measurement
results and exits the setting
process.
WRN CHECK
Displays a warning
concerning the
measurement results. See
"When you select "WRN
CHECK"" (page 44).
PHASE INFO
Displays the phase of each
speaker (in phase/out of
phase). See "When you
select "PHASE INFO""
(page 44).
3
Explanation
4
2.
Tip
See "When
The size of a speaker (LARGE/SMALL) is
error codes
determined by the low characteristics. The
appear" (page
measurement results may vary, depending on the
43).
position of the optimizer microphone and speakers,
and the shape of the room. It is recommended that
you follow the measurement results. However, you
.
can change those settings in the Speaker Settings
menu (page 63). Save the measurement results first,
then try to change the settings if you want.
When error codes appear
Try the remedies and re-perform the auto
calibration.
Error code
CODE 31
CODE 32
CODE 33 (F)
Item
Explanation
DIST.INFO
Displays the measurement
result for speaker distance.
LEVEL INFO
Displays the measurement
result for speaker level.
EXIT
Exits the setting process
without saving the
measurement results.
Press V/v repeatedly to select a
preset number to be used, then
press
.
Press
.
The measurement results are saved.
Cause and remedies
SPEAKERS (OFF/A/B/A+B) is
set to OFF. Set it to others and re-
perform the auto calibration.
None of the speakers were
detected. Make sure that the
optimizer microphone is
connected properly and re-
perform the auto calibration.
If the optimizer microphone is
connected properly but the error
code appears, the optimizer
microphone cable may be
damaged or improperly
connected.
None of the front speakers are
connected or only one front
speaker is connected. The
optimizer microphone is not
connected.
continued
43
GB
Hide quick links:
Advertisement
Table of Contents
