Sony STR-DA1200ES Operating Instructions Manual page 26

Notes on HDMI connections
• Audio signals input to the HDMI IN jacks
are output from the HDMI OUT jack. The
input audio signals are not output from the
speaker output jacks, PRE OUT jacks and
any other audio output jacks.
• You must connect audio or digital cords to
output sound from the receiver (page 29, 31).
• Video signals input to the HDMI IN jack can
only be output from the HDMI OUT jack.
The input video signals cannot be output
from the VIDEO OUT jacks, S VIDEO
OUT jacks, or MONITOR OUT jacks.
• Use an HDMI cable with the HDMI logo
(made by Sony).
• Check the setup of the connected component
if an image is poor or the sound does not
come out of a component connected via the
HDMI cable.
• Be sure to turn on the receiver when video
and audio signals of a playback component
are being output to a TV through this
receiver. Unless the power is on, neither
video nor audio signals will be transmitted.
• This receiver may not be able to transfer
video or audio signals with certain types of
components.
• Refer to the operating instructions of each
component connected for details.
26
GB