Sony STR-DA1200ES Operating Instructions Manual page 10

Sony multi channel av receiver operating instructions
Hide thumbs Also See for STR-DA1200ES:
Table of Contents

Advertisement

Name
Function
R L.F.E.
Lights up when the disc
being played back contains
an L.F.E. (Low Frequency
Effect) channel and the
L.F.E. channel signal is
actually being reproduced,
the bars underneath the
letters light up to indicate
the level. Since the L.F.E.
signal is not recorded in all
parts of the input signal the
bar indication will fluctuate
(and may turn off) during
playback.
S ;PRO
Lights up when the receiver
LOGIC (II/
applies Pro Logic
IIx)
processing to 2 channel
signals in order to output
the center and surround
channel signals. ";PRO
LOGIC II" also lights up
when the Pro Logic II
MOVIE/MUSIC/GAME
decoder is activated.
";PRO LOGIC IIx" also
lights up when the Pro
Logic IIx MOVIE/MUSIC/
GAME decoder is activated
(page 70).
Note
This indicator does not light if
both the center and surround
speakers are set to "NO" (page
64).
T NEO:6
Lights up when DTS Neo:6
Cinema/Music decoding is
activated (page 70).
U DISCRETE Lights up when DTS-ES
Discrete decoding is
activated (page 60).
V MATRIX
Lights up when DTS-ES
Matrix decoding is
activated (page 60).
10
GB
Name
Function
W SP-A/SP-B/
Lights up according to the
SP-OFF
speaker system used (page
38).
"SP-OFF" lights up when
"SP-OFF" is selected or
headphones are connected.
X PRESET
Lights up when TUNING
MODE is "PRESET."
Y Tuner
Lights up when using the
indicators
receiver to tune in radio
stations (page 77–82), etc.
Z MEMORY
Lights up when a memory
function, such as Name
Input (page 84) etc., is
activated.
wj VOLUME
Displays the current
volume.

Advertisement

Table of Contents
loading

Table of Contents