Sony STR-DA1200ES Operating Instructions Manual page 106

Reference Power Output
Reference Power Output
1)
Depending on the sound field settings and the
source, there may be no sound output.
2)
Measured under the following conditions:
Power requirements: 230 V AC, 50/60 Hz
Frequency response
PHONO
MULTI CHANNEL
INPUT, SA-CD/CD,
MD/TAPE, DVD,
VIDEO 1/2/3
Inputs (Analog)
PHONO
MULTI CHANNEL
INPUT, SA-CD/CD,
MD/TAPE, DVD,
TV/SAT, VIDEO1/2/3
106
GB
(8 ohms 1 kHz, THD 10%)
2)
FRONT :
130 W + 130 W
2)
CENTER :
130 W
2)
SURROUND :
130 W + 130 W
2)
SURROUND BACK
130 W + 130 W
(4 ohms 1 kHz, THD 10%)
2)
FRONT :
130 W + 130 W
2)
CENTER :
130 W
2)
SURROUND :
130 W + 130 W
2)
SURROUND BACK
130 W + 130 W
(in countries/areas in Europe
other than the U.K.)
240 V AC, 50/60 Hz
(in the U.K. and general
area)
RIAA equalization curve
± 0.5 dB
10 Hz – 100 kHz
± 3 dB
Sensitivity: 2.5 mV
Impedance: 50 kohms
S/N: 86 dB (A, 20 kHz
LPF)
Sensitivity: 150 mV
Impedance: 50 kohms
S/N: 96 dB (A, 20 kHz
LPF)
Inputs (Digital)
DVD, SA-CD/CD
(Coaxial)
VIDEO 1/3, TV/SAT,
MD/TAPE (Optical)
:
Outputs
MD/TAPE, VIDEO1/2
(AUDIO OUT)
FRONT L/R, CENTER,
SURROUND L/R,
SURROUND BACK L/R,
SUB WOOFER
EQUALIZER
:
Gain levels
FM tuner section
Tuning range
Antenna (aerial)
Antenna (aerial) terminals
Sensitivity
Mono:
Stereo:
Usable sensitivity 11.2 dBf, 1 µV/75 ohms
S/N
Mono:
Stereo:
Harmonic distortion at 1 kHz
Mono:
Stereo:
Separation
Frequency response 30 Hz – 15 kHz, +0.5/–2
Selectivity
AM tuner section
Tuning range
Antenna (aerial)
Usable sensitivity
S/N
Harmonic distortion 0.5% (50 mV/m, 400 Hz)
Selectivity
Impedance: 75 ohms
S/N: 96 dB (A, 20 kHz
LPF)
S/N: 96 dB
(A, 20 kHz LPF)
Voltage:150 mV
Impedance: 1 kohms
Voltage: 2 V
Impedance: 1 kohms
±10 dB, 1 dB step
87.5 - 108.0 MHz
FM wire antenna (aerial)
75 ohms, unbalanced
18.3 dBf, 2.2 µV/75 ohms
38.3 dBf, 22.5 µV/75 ohms
76 dB
70 dB
0.3%
0.5%
45 dB at 1 kHz
dB
60 dB at 400 kHz
531 – 1,602 kHz
(With 9-kHz tuning scale)
Loop antenna (aerial)
50 dB µ/m (at 999 kHz)
54 dB (at 50 mV/m)
35 dB