Sony STR-DA2100ES Operating Instructions for STRDA2100ES Operating Instructions Manual page 19

x SUB WOOFER XXX
(Sub woofer selection)
• YES
If you connect a sub woofer, select "YES".
• NO
If you did not connect a sub woofer, select
"NO". The front speakers are automatically
set to "LARGE" and you cannot change this
setting. This activates the bass redirection
circuitry and outputs the LFE signals from
other speakers.
• In order to take full advantage of the Dolby
Digital bass redirection circuitry, we
recommend that you set the cut off frequency
on the sub woofer as high as possible.
x FRONT SP XXXXX
(Front speakers size)
• LARGE
If you connect large speakers that will
effectively reproduce bass frequencies, select
"LARGE". Normally, select "LARGE".
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer. When the front speakers are set to
"SMALL", the center, surround and surround
back speakers are also automatically set to
"SMALL" (unless previously set to "NO").
x CTR SP XXXXX
(Center speaker size)
• LARGE
If you connect a large speaker that will
effectively reproduce bass frequencies, select
"LARGE". Normally, select "LARGE".
However, if the front speakers are set to
"SMALL", you cannot set the center speaker
to "LARGE".
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
center channel bass frequencies from the front
speakers (if set to "LARGE") or sub woofer.
• NO
If you did not connect a center speaker, select
"NO". The sound of the center channel will be
output from the front speakers.
x SURR SP XXXXX
(Surround speakers size)
• LARGE
If you connect large speakers that will
effectively reproduce bass frequencies, select
"LARGE". Normally, select "LARGE".
However, if the front speakers are set to
"SMALL", you cannot set the surround
speakers to "LARGE".
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the
sub woofer or other "LARGE" speakers.
• NO
If you did not connect surround speakers,
c)
select "NO".
x SB SP XXXXXX
(Surround back speakers selection)
When the surround speakers size parameter is
set to "NO", the surround back speakers
selection parameter is also automatically set to
"NO" (unless previously set to "ZONE-2").
• DUAL
If you connect two surround back speakers,
select "DUAL". The sound will be output to a
maximum of 7.1 channels.
• SINGLE
If you connect only one surround back
speaker, select "SINGLE". The sound will be
output to a maximum of 6.1 channels.
• NO
If you did not connect surround back
speakers, select "NO".
• ZONE-2
If you want to assign both your surround back
speakers to another room or zone, select
"ZONE-2". For details, see "Using the
surround back speakers for the 2nd zone" on
page 48.
a)
b)
continued
19 US