About The Indications In The Display - Sony STR-DA2100ES Operating Instructions for STRDA2100ES Operating Instructions Manual

About the indications in the display

1 2 3
SP.A SP.B MULTI CH IN
SLEEP
SW LFE
L C R
SL S SR
qh
SBL SB SBR
qj
A SW: Lights up when sub woofer selection is
set to "YES" (page 19) and the audio signal is
output from the SUB WOOFER jacks.
B LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
C SP.A/SP.B: Lights up in accordance with the
speaker system being used (A or B). Turns off
when speaker output is turned off or when
headphones are connected.
D MULTI CH IN: Lights up when
"MULTI CH IN" is selected.
E EQ: Lights up when the equalizer is activated.
F D.RANGE: Lights up when dynamic range
compression is activated (page 42).
G ; DIGITAL EX: "; DIGITAL" lights up
when Dolby Digital signals are input.
"; DIGITAL EX" lights up when Dolby
Digital EX signals are input.
Note
When playing a Dolby Digital EX format disc, be
sure that you have made digital connections and
that INPUT MODE is not set to "ANALOG
FIXED" (page 36).
4 5 6
;
EQ D.RANGE
;
A.DIRECT
qg
7 8
DIGITAL EX DTS-ES
PRO LOGIC IIx 96/24 NEO:6
qf qd
H DTS-ES 96/24: "DTS" lights up when DTS
signals are input. "DTS-ES" lights up when
DTS-ES signals are input. "DTS 96/24" lights
up when the receiver is decoding DTS 96 kHz/
24 bit signals.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to "ANALOG FIXED"
(page 36).
I OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal or when INPUT MODE is
set to "OPT FIXED"
J COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal or when INPUT MODE
is set to "COAX FIXED"
K Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 24–26 for tuner operations.
L D.ASSIGN: Lights up when the digital assign
function is used for the selected input.
M NEO:6: Lights up when DTS Neo:6 Cinema/
Music mode decoding is activated. However,
this indicator does not light up if both the
center and surround speakers are set to "NO".
9 q; qa
OPT COAX MONO
MEMORY
D.ASSIGN STEREO
qs
(page 36) .
(page 36) .
continued
27 US