1: Check How To Hookup Your Components - Sony STR-DA2100ES Operating Instructions for STRDA2100ES Operating Instructions Manual

Getting Started

1: Check how to hookup your components

Steps 1a through 1c beginning on page 7 describe how to hook up your components to this receiver.
Before you begin, refer to "Connectable components" below for the pages which describe how to
connect each component.
After hooking up all your components, proceed to "2: Connecting the antennas" (page 14).
Connectable components
Component to be connected
DVD player
With digital audio output
With multi channel audio output
With analog audio output only
TV monitor
With component video input
With S-Video or composite video input only
Satellite tuner
With digital audio output
With analog audio output only
Super Audio CD/CD player
With digital audio output
With multi channel audio output
With analog audio output only
MD/Tape deck
With digital audio output
With analog audio output only
Analog disc turntable
Multi channel decoder
VCR, camcorder, video game, etc.
a)
Model with a DIGITAL OPTICAL OUTPUT or DIGITAL COAXIAL OUTPUT jack, etc.
b)
Model with a MULTI CH OUTPUT jacks, etc. This connection is used to output the audio decoded by the
component's internal multi channel decoder through this receiver.
c)
Model equipped only with AUDIO OUT L/R jacks, etc.
d)
Model with component video (Y, P
a)
b)
c)
d)
a)
c)
a)
b)
c)
a)
c)
/C /B-Y, P /C /R-Y) input jacks.
B B R R
Page
7–8
10–11
7–8
8 or 11
13
7–8
7–8
9
10
12
9
12
12
10
13
continued
5 US