Table of Contents
Advertisement
The GEMINI-1 programmer is supplied with
'GEMINI for Windows' PC driver software.
This software is supplied on one 3.5"
floppy disk or can be downloaded from the
Equinox web site.
GEMINI-1 Programmer Interface
Software
• Powerful Windows Programmer Interface
Software compatible with
Windows 3.11™ Windows 95™,
Windows 98™ & Windows NT™
• Device: Check, Signature, Erase, Blank
Check, Read, Program, Verify, Special
Options and Security
• Supports programming of microcontroller
fuse bits
• Programmable RESET polarity
• Powerful RESET Timing utility allows most
RESET circuits to be accommodated
including C/R, External Watchdog and
3-pin CPU supervisor devices
• Powerful Auto-Program Utility
• Fast programming times
• Powerful Multiple File Loading Utility
• Supports Bin & HEX file formats
• Supports Reading/Writing of the
Status Byte
• Comprehensive context-sensitive on-line
help system
GEMINI for Windows Overview
To Install 'Gemini for Windows'
software:
•
Boot the PC into Windows environment
(Win 3.1, Win 95 or NT)
•
Insert 'GEMINI for Windows' disk into
floppy disk drive (A: / B:)
•
Select the 'Run...' command from the
'File' menu in the Program Manager
•
Select 'Browse' and navigate to the
floppy drive (A: / B:)
•
Select 'meridian.exe'
•
Select the 'OK' button
The software installation program should
now display an introductory screen. Please
follow the on-screen prompts in order to
complete the software installation process.
On completion, the installation program will
install the 'GEMINI' icon within a new
program group called 'Equinox'.
6
User Guide V0.90
To launch the software,
simply double-click on the
'GEMINI' icon.
Advertisement
Table of Contents
