Step 1: Preparation Of The Wall; Installation Instructions - GE RAB46B Installation Instructions Manual

STEP 1: Preparation of the wall

and lintels should be used to support the block above
the wall sleeve. The wall sleeve will not support the con-
and width:
Main stud
Jack studs
26 ¼ Min.
25 " Min.
15 ¾
15 " Min.
Cripple
Jack studs
Finished
r
NOTE: Use lintel to support brick, block, etc., above the
air conditioner wall sleeve. (If directly under a window
sill, the use of a lintel may not be necessary.)
Dimensions*
Width

Installation Instructions

Header - 4" x 4" r
tw e
Adjust framing
t ure this
dime n
"D"*
( *See chart
e 1)
r
Wall Sleeve Dimensions
Width Depth
STEP 2: Assemble Wall Sleeve
panel until all tabs lock completely.
rear of the assembled sleeve with four (4) supplied
white push pins.
2
2
Front View
Front View
Front View
Front View
1
3
Weather Barrier
4
Rear View