How To Configure Ff Internal Interconnections (Control In The Field) - Siemens Simatic PCS 7 Commissioning Manual

Process control system foundation fieldbus

Hide thumbs Also See for Simatic PCS 7:

Table of Contents

How to configure FF internal interconnections (Control in the field)

Note

Required CiF interconnections

Refer to the documentation of the device manufacturer for information about any required

CiF interconnections.

Requirements

● FF devices have been created in the project.

● Addresses were assigned for signals required from the function blocks of the FF devices.

Procedure

1. Open configuration in HW Config.

2. Select the interface module for the FF Link (IM 153-2 FF).

3. Select the SIMATIC PDM > Start Interconnection Editor command from the shortcut menu.

4. Search for the source of an interconnection for each interconnection in the tree structure

5. When you have selected an interconnection, click "Add interconnection".

FOUNDATION Fieldbus

Commissioning Manual, 03/2013, A5E03880935-02

Icon

Displayed object

Digital input

Analog output

Digital output

The "Interconnection Editor" dialog opens.

"Outputs" and search for the target in the tree structure "Input".

The FF-internal interconnection is added to the "Interconnection" column.

Note

Deleting an interconnection

Select a row in the "Inputs and interconnections" list.

Click "Delete interconnection".

Engineering

4.2 Configuring

Interconnected

Not interconnected

Interconnected

Not interconnected

Interconnected

Table of Contents