Other Operations; Controlling The Tv With The Supplied Remote - Sony DAV-S300 Operating Instructions Manual

Other
Operations
This chapter describes how to set the
remote for controlling the TV, listen to
the radio, etc.
Controlling the TV with the
Supplied Remote Z
If you adjust the remote signal, you can control your TV
with the supplied remote. Default setting is to control
Sony TVs with the g mark.
TV ?/1
1
4
7
>10
Controlling TVs with the remote
1
While holding down TV ?/1,
1 Enter your TV's manufacturer's code (see the
table on the next page) using the number
buttons.
2 Press ENTER.
2
Release TV ?/1.
Code numbers of controllable TVs
If more than one code number is listed, try entering them
one at a time until you find the one that works with your
TV.
Notes
• If you enter a new code number, the code number previously
entered will be erased.
• When you replace the batteries of the remote, the code number
may reset to 01 (Sony). Reset the appropriate code number.
2 3
Number buttons
5 6
8 9
10/0
ENTER
51