Receiving Radio Data System (Rds); Other Operations; Using The Control For Hdmi; Function For "Bravia" Sync - Sony BDV-N9200WL Operating Instructions Manual

Tip
Each time you press DISPLAY, the display in
the top panel display changes cyclically as
follows:
Frequency t Preset number t Decoding
status*
* Appears when [Sound Effect] is set to
[Dolby Pro Logic], [DTS Neo:6 Cinema], or
[DTS Neo:6 Music] (page 59).
Receiving Radio Data
System (RDS)
(Europe models only)
The system offers RDS feature which
enables you to view additional
information from radio stations.
Simply select a station from the FM
band.
The station name appears on the TV
screen.
Note
• RDS may not work properly if the station
you are tuned to is not transmitting the
RDS signal properly, or if the signal
strength is weak.
• Not all FM stations provide RDS service,
nor do they provide the same type of
services. If you are not familiar with the
RDS system, check with your local radio
stations for details on RDS services in your
area.

Other Operations

Using the Control for
HDMI Function for
"BRAVIA" Sync
This function is available on TVs with the
"BRAVIA" Sync function.
By connecting Sony equipment that is
compatible with the Control for HDMI
function via an HDMI cable, operation is
simplified.
Note
To use the "BRAVIA" Sync function, be sure
to turn on the system and all connected
equipment after completed the HDMI
connection.
Control for HDMI - Easy Setting
You can set the system's [Control for
HDMI] function automatically by
enabling the corresponding setting on
the TV.
For details about the Control for HDMI
function, see "[HDMI Settings]"
(page 60).
System Power Off
You can turn the system off in sync with
the TV.
Note
The system does not turn off automatically
while playing music or when "FM" function
is selected.
One-Touch Play
When you press N on the remote
control, the system and TV turn on, and
the TV's input is switched to the HDMI
input which the system is connected.
45
GB