Presetting Radio Stations - Sony DAV-S300 Operating Instructions Manual

Presetting Radio Stations

You can preset 20 stations for FM and 10 stations of AM.
Before tuning, make sure that you have turned down the
volume to the minimum.
1 2 3
4 5 6
BAND
7 8 9
>10 10/0
PRESET +/–
TUNING +/–
ENTER
1
Press BAND repeatedly until the band you want
appears on the front panel display.
Every time you press BAND, FM and AM changes
alternately.
2
Press and hold TUNING + or – until the frequency
indication starts to change, then release.
Scanning stops when the system tunes in a station.
"TUNED" and "STEREO" (for stereo program) appear
on the front panel display.
3
Press MEMORY.
A preset number appears on the front panel display.
4
Press PRESET + or – to select the preset number you
want.
5
MEMORY
6
To tune in a station with a weak signal
Press TUNING + or – repeatedly in Step 2 to tune in the
station manually.
To change the preset number
Start over from Step 1.
To change the AM tuning interval
The AM tuning interval is factory set to 9 kHz.
To change the AM tuning interval, tune in any AM station
first, then turn off the power. While holding down the
ENTER button, turn the power back on. When you
change the interval, AM preset stations will be erased.
To reset the interval, repeat the same procedure.
Press ENTER.
The station is stored.
Repeat Steps 1 to 5 to store other stations.
17