Hotpoint KVS06 Use And Care Manual page 11

7. Close window until it touches
behind air conditioner top bar.
Slide filler panels outward until
they touch window sash tracks. (Do
not release grip on air conditioner
until lower window sash is in final
position.)
Type A wood screws into lower
window sash through mounting
holes in top slides.
9. Secure bottom of filler panels by
driving Type A wood screws into
window stool through filler panel
tabs.
10. Cut plastic foam seal to width
of window and install it between
upper and lower window sash.
knobs.
(see page 5).
Window Stool
Instillation in Window Openings 201A" to 22~" Wide
1. Remove both filler panels from
air conditioner cabinet.
2. Refer to steps 1 through 6 on
page 8.
3. Close window until it touches
behind air conditioner top bar.
4. Fasten lower window sash to
window frame (use finishing nails,
wood screws or "L" bracke~s).
Window Sash
Slide
A Wood Screw
e
5. If filler is required on sides of
air conditioner, cut plastic foam
seal to size and fill both sides.
6. Cut plastic foam seal to width of
window and install it between
upper and lower window sash.
7. Attach dial plate and control
knobs.
8. Attach air filter and front grille
(see page 5).