Registering Audio And Video Components - Sony TA-VE810G Operating Instructions Manual

Registering Audio and Video
Components
You must register the IR code of your audio/video
component to control your component using the on-
screen display.
IR code registration is unnecessary in the
following case
If your audio/video component is a Sony product that
can be controlled by an infrared remote, and it is
connected to the jacks shown in the following table,
you do not need to register the IR code.
Amplifier jacks Component to be connected
VIDEO 1 Sony VTR 3 (VHS)
VIDEO 2 Sony VTR 1 (BETA)
VIDEO 3 Sony VTR 2 (8 mm)
LD/DVD Sony LD player
SATL Sony Satellite receiver
TUNER Sony Tuner
DAT/MD Sony DAT deck
CD Sony CD player (CD 1)
TAPE Sony Tape deck
MONITOR Sony TV (via its VIDEO 1 jack)
The following cases require registration of Sony products
• When connecting a Sony MD deck to the DAT/MD
jacks.
• When connecting a Sony audio product with
CONTROL-A1 compatibility.
• When connecting a Sony product to jacks other than
those specified in the previous table (e.g., when
connecting a Sony LD player to the VIDEO 3 jacks).
• When exchanging a non-Sony audio or video
component with a Sony product.
Notes
• If your VCR has a COMMAND CODE selector switch (for
VTR1, VTR2, or VTR3), set the switch to the applicable
setting. If your VCR has a built-in StarSight tuner, you
must set the COMMAND CODE selector switch to VTR 3.
• If your CD changer has a COMMAND MODE selector
switch (for CD 1, CD 2, or CD 3), normally it should be set
to "CD 1." However, if your CD changer has VIDEO OUT
terminals, set the command mode to "CD 2" or "CD 3"
("CD 3" should be used only when making CONTROL-A1
connections).
Setting Up the Remote for On-Screen Control
Registering IR codes
1
Click SETUP in the main menu.
FUNCTION
2
Click IR SET.
FUNCTION
TV
IR
USER IR
AUTO START
MACRO PLAY
3
Click the name of the amplifier's jack you want.
RETURN
Amplifier's jacks
4
• Sony product
Click Sony.
The IR codes are automatically registered and
registration is complete.
To take advantage of CONTROL-A1 compatible audio
components, such as multi-disc CD players, click
CONTROL-A1 to select CONTROL-A1.
• non-Sony product
Click OTHER.
Getting Started
SOUND SETUP
SOUND SETUP
SET FUNC INDEX
SET CD INDEX
TUNER INDEX
SLEEP TIMER
OSD SETUP
EXIT
IR CODE SETTING
VIDEO 1 Sony VTR3
VIDEO 2 Sony VTR1
VIDEO 3 Sony VTR2
LD/DVD Sony LD
SATL Sony SATL
TAPE Sony TAPE
DAT/MD Sony DAT
CD Sony CD1
TUNER Sony TUNER
EXIT
Connected
component
IR CODE SETTING
MAKER Sony OTHER
OUTPUT IR
IR CODE SETTING
MAKER Sony OTHER
OUTPUT IR
(continued)
GB
15